The Switch Socket Must Be Installed On the Wall
The socket must be installed on the wall, and it is not allowed to use the wire for hoisting. The power supply must be connected to the socket. It is absolutely forbidden to connect the power supply to the plug. The shell of the socket should be intact. The flush mounted socket must be set on the switch back box. The cover plate of the box should be intact and tightly covered and sealed. No gap should be left on the wall. Generally, the surface mounted socket shall be installed on the insulating material and the cover shall be tightened, without movement.
When the plug is inserted or pulled out, use another hand to press and hold the panel of the socket firmly to avoid damaging the structure of the socket. At the same time, the hands should be dry.
When the plug is inserted or pulled out, the hand should hold the plug body instead of its connecting wire. The plug shall be firmly and tightly inserted.
Hope you got the points. Any questions on our switch and socket, please feel free to contact us.