The 2 pin & 3 pin sockets with switch (new version) wiring teaching
The 2 pin & 3 pin sockets with switch, also called one-opening five-holes, is switch socket with a high usage rate in our daily lives. There are also many ways to connect it, and people gradually pursue simplicity as the times change. Compared with the 2 pin & 3 pin sockets with switch of traditional structure, electricians prefer this kind of product with a public line of fire.
The new version of JUNON's 2 pin & 3 pin sockets with switch adopts this new structure, no jumper operation is required when wiring, which is convenient, simple and high safety performance.
The 2 pin & 3 pin sockets with switch (new version) back figure
First connect the live wire of the lamp to the 【L1 end】, then connect the live wire of the main power supply to the 【L end】, then connect the neutral wire of the main power supply to the 【N end】, and finally connect the ground wire to the terminal that marked ground wire, tighten the screw, check that it is correct, and test it with electricity.
Switch control socket
First take out a live wire from the main power supply and connect it to the 【L1 end】, then connect the neutral wire to the 【N end】, and finally put the ground wire of the second line of defense of life into the terminal with the ground wire mark, and tighten the screw, Check whether the line is loose, and then power on to test.
The new version of 2 pin & 3 pin sockets with switch is designed like this, that make the wiring is much simpler.