How to Wire a Plug Socket?
Wiring a plug socket is extremely simple and can be easily done by beginners.
Step 1: Loosen the screws of the connectors on the back of the plug.
Step 2: Strip the three cable wires (Red – Live wire, Black – Neutral wire, and Green – Earth wire).
Step 3: After stripping the wires, you will find the copper tips of the three wires.
Step4: Take the earth wire (green) and insert the copper tip in between the loosened screw of the connector.
Step 5: Take the live wire (red) and insert the copper tip in between the loosened screw of the connector. This is located on the bottom left of the plug.
Step 6: Take the neutral wire (black) and insert the copper tip in between the loosened screw of the connector. This is located on the bottom right of the plug.
Step 7: Once the three wires have been inserted, fasten the screws to ensure the copper tip meets the screw.
Step 8: Clip the plug onto the switchboard.
Get it? If you have any doubt, Contact us freely. (wendy@junlang.com)