How many switch sockets can be installed in the toilet?
Say the stand or fall of a place, see its toilet is enough. This is why the toilet is important. Among them, switch socket installation is very exquisite.
According to the distribution of the circuit, 7-8 switch sockets in the toilet are required, which are as follows:
1. One socket (with waterproof box, socket 16A) should be reserved near the water heater.
2. One socket (with waterproof box should be reserved near the washing machine.
3. One socket (with waterproof box) should be reserved behind the smart toilet.
4. At least two sockets shall be reserved above the washbasin (with waterproof box).
5. One single-control lighting switch shall be reserved.
6. Reserve a multi-in-one bath bully switch.
The socket in the toilet shall be installed with waterproof box to avoid the occurrence of accidents such as splash water leakage. When choosing toilet switch socket, need to consider the use demand of its each respect to decide quantity not only, and specific want to pay attention to the following a few questions:
1. When installing the switch, the installation height of the switch shall be 1.2-1.4m from the ground and 150-200mm from the horizontal distance of the door frame.
2. The top earth hole of the three-hole socket must be firmly connected with the earth wire, solid and right, and must be grounded.
3. When the socket is installed, the socket shall be not less than 1.8 meters from the ground.
4, the location of the installation switch socket cannot have more than two tiles be damaged, and try to make it installed in the middle of the ceramic tile.
Summary: in the choice of toilet switch socket to have a certain understanding, reasonable arrangement of switch socket installation height and quantity, can better ensure the normal use of the toilet.