Electronic light dimmer switch wiring instruction
Recently, the glasses group is growing larger and younger, and there are many reasons for this phenomenon. Using your eyes transitively to watch phone and IPAD. Bad habits of using eyes, for example squinting things. Read in the sun or in places with insufficient light. And so on……
But the root cause is still the light source, and the light intensity varies from season to season. For eye health, I recommend that you use dimmable lights to adjust the appropriate light source to protect vision based on the actual light intensity.
Most of the dimming is performed by electronic dimmer switch, which adjust pure resistive loads to control the brightness and achieve comfortable to use eyes. So how this electronic dimmer switch should be wired?
1. First, take out the live wire from the main power cord, connect it to the [Lin end] of the switch, and tighten the screws.
2. Then, remove the live wire from the load, connect it to the [Lout end] of the switch, and tighten the screw.
3. Next, connect the neutral wire in the power supply and the neutral wire of the load together, and stick it with electrical tape to prevent exposure.
4. Finally check whether the wire is loose and whether the tape is sticky. After the inspection, start the power-on test.
The eyes are the windows of the soul and the spiritual bridge between people. Quickly install a JUNON electronic dimmer switch to control the light and protect your eyes. Let's stay away from glasses.