Answers about JUNON Switch & Socket Factory

- Sep 06, 2020-

Answers about JUNON Switch & Socket Factory


The sword will rust if it is not Sharpen, and people will fall behind if they do not learn. Although not everyone has great talents, there is an instinct that everyone does, and that is to study hard. "Electrician Note" is a platform for communication and learning to answer your difficult questions at work.

 

1. If the switch & socket purchased online, how to tell if it is genuine?
Answer: There is an anti-counterfeit QR code on the packaging of JUNON products. Users only need to scan the code with WeChat and look at the feedback on the page to identify the authenticity.

Answers ahout JUNON switch and socket factory 1

 

2. What is the difference between 10A socket and 16A socket?
10A socket: It can be used for electrical appliances with power ≤ 2 kilowatts.
16A socket: It can be used for electrical appliances with power ≤ 3 kilowatts (such as air conditioners, electric water heaters and other high-power equipment).

Answers ahout JUNON switch and socket factory 2


 

3. What is the purpose of fixing screws and long screws?

When buying switch & socket, two 2.5cm screws are provided. However, ceramic tiles are generally laid in the kitchen and bathroom, which increases the thickness of the wall. Therefore, the switch & socket needs to be fixed with elongated screws. During installation, you need to consult an electrician to choose a suitable length of screw.

 

4. What is the difference between surface and flush mounted products?
The installation method is different: The surface-mounted series is installed on the wall with its own bottom box, after installation, it is about 3cm higher than the wall. The flush mounted series should be slotted in the wall, concealed wires, and the bottom box embedded in the wall, after installation, the wall surface only protrudes the panel.

 

The construction method is different: the switch & socket of the surface mounted series is connected to the bottom box, and the corresponding nails (cement nails for cement walls and self-tapping screws for the wood wall) are required for installation; the flush mounted series products only need to purchase the concealed bottom box and it can be installed after being embedded in the wall during decoration.

Answers ahout JUNON switch and socket factory 3