Answers about JUNON Switch & Socket Factory
1. What does the 6000A of the circuit breaker represent?
Answer: This represents the maximum short-circuit breaking current of the circuit breaker. If the amperage is small, the breaking capacity of the product is large, and the circuit breaker can be easily turned off; if the amperage is large, the breaking capacity of the product is small, the circuit breaker is not easy to turn off.
2. The customer uses a 63A earth leakage circuit breaker, which trips after a while. Do I need to replace the 40A?
Answer: This depends on whether the leakage indication button on the product pops up after the trip. If there is a pop up, it means there is a leakage. It is recommended to remove the load first, and then try the switch. If the switch is normal, you need to check the leakage of the load at home. You can first turn off all live electrical appliances, then close the earth leakage circuit breaker, and then turn on the electrical appliances separately. At the end of the trip, it shows that the corresponding circuit or electrical appliance has a leakage situation. After analyzing the reasons according to the actual situation, we can judge whether it needs to be replaced.
3. How to distinguish between single control and double control?
Answer: The single control is a switch in one place to control a load, and the dual control is a switch in two places to control a load at the same time. It is generally used for stairs, inside or outside the room or the entrance and bedside of the bedroom room.
4. What is the purpose of the blank panel?
Answer: The blank panel seems useless, but it is actually very useful. First of all, redundant or temporarily unused mounted box of switch & socket can be covered with blank panels, this is for aesthetics; secondly, it is for protection. Because the back of the switch panel is also wired, it is not safe to expose them to the outside.