Answers about JUNON Switch & Socket Company
Welcome to JUNON "Electrician Note", to solve the difficult problems in the work for the electrician, let you become the best model of the electrician group, the large-capacity reserve of electrician knowledge. Next, let's go into the answer moment together.
1. Why the red dots on the two switch & sockets different?
A: Because the switch is hot stamping, the button of the switch with socket has no hot stamping. It’s Pad printing.
2. Without tripping when short circuit. Is the reason of the leakage switch has a problem?
A: The average customer's lamp line is 1.5 square, and the leakage switch is 63A. In the case of a short circuit of the lamp, the leakage switch does not trip because the short-circuit current does not reach the short-circuit current value of the switch.
3. After the LED is turned off, there will be a flashing situation. What is the cause?
A: If there is such a situation in the newly installed lamp, it is necessary to check whether the live wire and neutral wire is changed. If this happens after a period of time, the drive power may be damaged.
4. If I have 6 32A miniature circuit breaker and 6 20A miniature circuit breaker, how many Amps residual-current circuit breaker is suitable to match?
A: The most appropriate method is to choose the model according to the power consumption of the customer's home. You can also use the bipolar 40A leakage circuit breaker as the main switch. Use the more 6-square line to enter. You can also use the 63A leakage circuit breaker as the main switch. Use a more 10-square line to enter.
Locke once said, "The trick of learning a lot of things is that you don't want to learn a lot at once." Knowledge is slowly accumulating, and the experience is slowly summed up. It is not a one-off, so look at the JUNON "Electrician Note", a learning platform that will benefit you a lot.
If you have difficulties or doubts about switch & socket, please feel free to contact us.