Metal Lock Box Wall Mount
JUNON Metal Lock Box Wall Mount, also known as a consumer control unit or electricity control unit, as "a particular type of distribution board comprising a type-tested co-ordinated assembly for the control and distribution of electrical energy, principally in domestic premises, incorporating manual means of double-pole isolation on the incoming circuit(s) and an assembly of one or more fuses, circuit breakers, residual current operated devices or signaling and other devices proven during the type-test of the assembly as suitable for use
Series: V16 series
Name: Metal Lock Box Wall Mount
Model No.: V16MCB-12/E
Installation: Flush Mounted.
Material: 1.2mm Cold-Rolled Steel
Lock Material: Metal
Rated Voltage: 400V~
Rated current: 125A
Rated frequency: 60Hz
IP rating: IP30
Package: 1pc/carton, 490*138*408mm
Open Angle: Max.180°
What's Inside Metal Lock Box Wall Mount
The service entrance wires connect to two large terminals, called lugs, near the top of the panel. These lugs are always energized unless the utility company shuts off the power. The lugs—and all the wiring connecting to the panel box—are covered by a flat metal panel called the dead front cover. This is what you see when you open the door of your distribution box. The dead front cover has cutouts that allow access to all the breakers, and that's as far as homeowners need to go. Do not remove the dead front cover unless you know what you're doing.
Why To Choose
1. 100% of insulating materials.
2. New designed international standard wall switch.
3. Each piece will be tested before packing, product quality is guaranteed.
4. Quality certificates such as CCC, CE, CB, SASO.
5. OEM&ODM provided here.
To get more details for our Metal Lock Box Wall Mount and other products, please do not hesitate to contact us.